Home > Designing, Others > Two CSS Properties for Trimming Text Box Whitespace

Two CSS Properties for Trimming Text Box Whitespace

September 13th, 2024 Leave a comment Go to comments
The word incendiary showing its text box and whitespace above and below it.

The text-box-trim and text-box-edge properties in CSS enable developers to trim specifiable amounts of the whitespace that appear above the first formatted line of text and below the last formatted line of text in a text box, making the text box vertically larger than the content within.

This whitespace is called leading, and it appears above and below (so it’s two half-leadings, actually) all lines of text to make the text more readable. However, we only want it to appear in between lines of text, right? We don’t want it to appear along the over or under edges of our text boxes, because then it interferes with our margins, paddings, gaps, and other spacings.

As an example, if we implement a 50px margin but then the leading adds another 37px, we’d end up with a grand total of 87px of space. Then we’d need to adjust the margin to 13px in order to make the space 50px in practice.

As a design systems person, I try to maintain as much consistency as possible and use very little markup whenever possible, which enables me to use the adjacent-sibling combinator (+) to create blanket rules like this:

/* Whenever <element> is followed by <h1> */
<element> + h1 {
  margin-bottom: 13px; /* instead of margin-bottom: 50px; */
}

This approach is still a headache since you still have to do the math (albeit less of it). But with the text-box-trim and text-box-edge properties, 50px as defined by CSS will mean 50px visually:

The word incendiary with its text box flush against its top and bottom edges.

Disclaimer: text-box-trim and text-box-edge are only accessible via a feature flag in Chrome 128+ and Safari 16.4+, as well as Safari Technology Preview without a feature flag. See Caniuse for the latest browser support.

Start with text-box-trim

text-box-trim is the CSS property that basically activates text box trimming. It doesn’t really have a use beyond that, but it does provide us with the option to trim from just the start, just the end, both the start and end, or none:

text-box-trim: trim-start;
text-box-trim: trim-end;
text-box-trim: trim-both;
text-box-trim: none;

Note: In older web browsers, you might need to use the older start/end/both values in place of the newer trim-start/trim-end/trim-both values, respectively. In even older web browsers, you might need to use top/bottom/both. There’s no reference for this, unfortunately, so you’ll just have to see what works.

Now, where do you want to trim from?

You’re probably wondering what I mean by that. Well, consider that a typographic letter has multiple peaks.

There’s the x-height, which marks the top of the letter “x” and other lowercase characters (not including ascenders or overshoots), the cap height, which marks the top of uppercase characters (again, not including ascenders or overshoots), and the alphabetic baseline, which marks the bottom of most letters (not including descenders or overshoots). Then of course there’s the ascender height and descender height too.

You can trim the whitespace between the x-height, cap height, or ascender height and the “over” edge of the text box (this is where overlines begin), and also the white space between the alphabetic baseline or descender height and the “under” edge (where underlines begin if text-underline-position is set to under).

Don’t trim anything

text-box-edge: leading means to include all of the leading; simply don’t trim anything. This has the same effect as text-box-trim: none or forgoing text-box-trim and text-box-edge entirely. You could also restrict under-edge trimming with text-box-trim: trim-start or over edge trimming with text-box-trim: trim-end. Yep, there are quite a few ways to not even do this thing at all!

Newer web browsers have deviated from the CSSWG specification working drafts by removing the leading value and replacing it with auto, despite the “Do not ship (yet)” warning (*shrug*).

Naturally, text-box-edge accepts two values (an instruction regarding the over edge, then an instruction regarding the under edge). However, auto must be used solo.

text-box-edge: auto; /* Works */
text-box-edge: ex auto; /* Doesn't work */
text-box-edge: auto alphabetic; /* Doesn't work */

I could explain all the scenarios in which auto would work, but none of them are useful. I think all we want from auto is to be able to set the over or under edge to auto and the other edge to something else, but this is the only thing that it doesn’t do. This is a problem, but we’ll dive into that shortly. 

Trim above the ascenders and/or below the descenders

The text value will trim above the ascenders if used as the first value and below the descenders if used as the second value and is also the default value if you fail to declare the second value. (I think you’d want it to be auto, but it won’t be.)

text-box-edge: ex text; /* Valid */
text-box-edge: ex; /* Computed as `text-box-edge: ex text;` */
text-box-edge: text alphabetic; /* Valid */
text-box-edge: text text; /* Valid */
text-box-edge: text; /* Computed as `text-box-edge: text text;` */

It’s worth noting that ascender and descender height metrics come from the fonts themselves (or not!), so text can be quite finicky. For example, with the Arial font, the ascender height includes diacritics and the descender height includes descenders, whereas with the Fraunces font, the descender height includes diacritics and I don’t know what the ascender height includes. For this reason, there’s talk about renaming text to from-font.

The word incendiary written in two variations with accents showing how the test box is affected.

Trim above the cap height only

To trim above the cap height:

text-box-edge: cap; /* Computed as text-box-edge: cap text; */
The word incendiary with the D character slightly outside the top of the text box boundary.

Remember, undeclared values default to text, not auto (as demonstrated above). Therefore, to opt out of trimming the under edge, you’d need to use trim-start instead of trim-both:

text-box-trim: trim-start; /* Not text-box-trim: trim-both; */
text-box-edge: cap; /* Not computed as text-box-edge: cap text; */

Trim above the cap height and below the alphabetic baseline

To trim above the cap height and below the alphabetic baseline:

text-box-trim: trim-both;
text-box-edge: cap alphabetic;
The word incendiary with no whitespace.

By the way, the “Cap height to baseline” option of Figma’s “Vertical trim” setting does exactly this. However, its Dev Mode produces CSS code with outdated property names (leading-trim and text-edge) and outdated values (top and bottom).

Figma screenshot of text settings.

Trim above the x-height only

To trim above the x-height only:

text-box-trim: trim-start;
text-box-edge: ex;
The word incendiary with slight spacing along the bottom edge of its text box.

Trim above the x-height and below the alphabetic baseline

To trim above the x-height and below the alphabetic baseline:

text-box-trim: trim-both;
text-box-edge: ex alphabetic;
The word incendiary with no whitespace.

Trim below the alphabetic baseline only

To trim below the alphabetic baseline only, the following won’t work (things were going so well for a moment, weren’t they?):

text-box-trim: trim-end;
text-box-edge: alphabetic;

This is because the first value is always the mandatory over-edge value whereas the second value is an optional under-edge value. This means that alphabetic isn’t a valid over-edge value, even though the inclusion of trim-end suggests that we won’t be providing one. Complaints about verbosity aside, the correct syntax would have you declare any over-edge value even though you’d effectively cancel it out with trim-end:

text-box-trim: trim-end;
text-box-edge: [any over edge value] alphabetic;
The word incendiary with slight whitespace along the upper edge of its text box.

What about ideographic glyphs?

It’s difficult to know how web browsers will trim ideographic glyphs until they do, but you can read all about it in the spec. In theory, you’d want to use the ideographic-ink value for trimming and the ideographic value for no trimming, both of which aren’t unsupported yet:

text-box-edge: ideographic; /* No trim */
text-box-edge: ideographic-ink; /* Trim */
text-box-edge: ideographic-ink ideographic; /* Top trim */
text-box-edge: ideographic ideographic-ink; /* Bottom trim */

text-box, the shorthand property

If you’re not keen on the verbosity of text box trimming, there’s a shorthand text-box property that makes it somewhat inconsequential. All the same rules apply.

/* Syntax */
text-box: [text-box-trim] [text-box-edge (over)] [text-box-edge (under)]?

/* Example */
text-box: trim-both cap alphabetic;

Final thoughts

At first glance, text-box-trim and text-box-edge might not seem all that interesting, but they do make spacing elements a heck of a lot simpler.

Is the current proposal the best way to handle text box trimming though? Personally, I don’t think so. I think text-box-trim-start and text-box-trim-end would make a lot more sense, with text-box-trim being used as the shorthand property and text-box-edge not being used at all, but I’d settle for some simplification and/or consistent practices. What do you think?

There are some other concerns too. For example, should there be an option to include underlines, overlines, hanging punctuation marks, or diacritics? I’m going to say yes, especially if you’re using text-underline-position: under or a particularly thick text-decoration-thickness, as they can make the spacing between elements appear smaller.


Two CSS Properties for Trimming Text Box Whitespace originally published on CSS-Tricks, which is part of the DigitalOcean family. You should get the newsletter.

Categories: Designing, Others Tags:
  1. No comments yet.
You must be logged in to post a comment.